logo

Подробная информация о продукции

Created with Pixso. Дом Created with Pixso. продукты Created with Pixso.
Оборудование для испытаний соединителя EV
Created with Pixso.

750L EV Connector Temperature Controlled Water Bath Testing Equipment

750L EV Connector Temperature Controlled Water Bath Testing Equipment

Наименование марки: Sinuo
Номер модели: SNQC1015
МОК: 1
цена: Customized
Условия оплаты: Т/Т
Способность к поставкам: 20 комплектов/месяц
Подробная информация
Место происхождения:
Китай
Сертификация:
Calibration Certificate (Cost Additional)
Мощность изоляции:
5кВт
Внутренние размеры (Д*Ш*В):
1500×500×1000мм
Температурная стабильность:
<1,5 ℃
Входное напряжение:
AC 380V/50 Гц
Диапазон контроля температуры:
Комнатная температура | 100℃
Мощность электрического нагрева:
18кВт
Упаковывая детали:
фанерный корпус
Поставка способности:
20 комплектов/месяц
Описание продукта

 

 

750L EV Connector Temperature Controlled Water Bath Testing Equipment

 

Complied Standards & Clauses


 

This constant water bath is required by IEC 60811-402:2012, IEC502-83, etc.

 

Equipment Overview


 

This constant temperature water bath is specially designed for precision electrical performance testing of PVC wires and cables. The inner tank and cover are constructed from high-quality stainless steel, while the exterior adopts a durable cold-rolled steel chassis for long-lasting stability and corrosion resistance. Equipped with electric heating, intelligent temperature control, and a clear digital display, the system ensures accurate and uniform temperature distribution. An optional circulating pump is available to further enhance temperature consistency for demanding applications.

With its elegant design, energy-efficient operation, and reliable temperature stability, this water bath is widely used by quality inspection laboratories and cable manufacturers to measure DC resistance, insulation resistance, and other key performance parameters. Fully compliant with IEC 60811-402:2012, IEC502-83, and related standards, it provides a dependable solution for constant-temperature water bath testing in professional cable evaluation. The integrated insulation port allows easy threading of wires and cables, offering both convenience and efficiency in daily testing work.

 

Technical Parameters


 

Parameter

Specification

Inner Dimensions (L×W×H) 1500 × 500 × 1000 mm
Temperature Control Range Room temperature ~ 100℃ (user can preset required test temperature, e.g., 70℃ or 90℃)
Temperature Stability < 1.5℃
Electric Heating Power 18 KW
Insulation Power 5 KW
Input Voltage AC 380V / 50Hz
Temperature Uniformity Guarantee High-precision instrument control + circulation pump for forced circulation
Low Water Level Alarm Yes, heating tube automatically powers off when water is insufficient
Cover Holes & Layout 12 holes total: two each of 1, 2, 3, 4, 5, 10 cm
Automatic Water Replenishment Yes
Display & Interface LCD panel display with computer interface (RS485)
Usage Notes - Read the manual carefully and be familiar with the instrument and control panel- Use a megohmmeter to check if power supply, plug, and grounding are properly insulated and not short-circuited- Use distilled water only; river water or hard water is prohibited- If tap water is used, clean the water bath after each use to prevent scale buildup on the heater, which may affect temperature sensitivity
 

Details


 

750L EV Connector Temperature Controlled Water Bath Testing Equipment 0750L EV Connector Temperature Controlled Water Bath Testing Equipment 1